Windshield Removal Kit
Model :
AWT-12-K185
AWT-12-K185
Windshield Removal Kit
․№1Wire
Material: stainless
․№2 pc Wire Gripping Handles
A and B feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle; the wire is held.
․№3 Windshield Removal Tool
Cuts the vinyl adhesive compound around windshield.
․№4 Wire Feeder Tool
Designed for easy and flexible insertion of wire through polyurethane; allowing speedy removal of bonded windshield.
․№5 Trim Pad Remover
Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible; then simple pry up.
․№6 Windshield Molding Release Tool
Use for removal of windshield molding on rubberless installation.
․All organized in a tray and color box.
Packing: 1 set/color box 6/Inner
12/carton/ N.W.:13.6KG/G.W.:16KG/ 2.8’
Windshield Removal Kit
․№1Wire
Material: stainless
․№2 pc Wire Gripping Handles
A and B feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle; the wire is held.
․№3 Windshield Removal Tool
Cuts the vinyl adhesive compound around windshield.
․№4 Wire Feeder Tool
Designed for easy and flexible insertion of wire through polyurethane; allowing speedy removal of bonded windshield.
․№5 Trim Pad Remover
Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible; then simple pry up.
․№6 Windshield Molding Release Tool
Use for removal of windshield molding on rubberless installation.
․All organized in a tray and color box.
Packing: 1 set/color box 6/Inner
12/carton/ N.W.:13.6KG/G.W.:16KG/ 2.8’
